THREE EASY STEPS TO INSTALLATION AND PROPER USE OF THE RS-5
|
| |
Click Image to Enlarge |
| 1 |
Install the mounting adapter to the outside surface of the van rack using all four bolt openings as illustrated. Make sure adapter arm points toward the center of the vehicle.
|
 |
| 2 |
Install the Rack-Strap tie-down to the adapter arm using all four bolt holes as illustrated. |
 |
| 3 |
FOR PROPER USE:
- Load the material on the van rack.
- Remove an adequate amount of strap by pulling from behind the Rack-Strap.
- Loop the strap under the material from back to front.
- Reattach the hook to the pin in the front of the Rack-Strap frame.
- Ratchet the system to desired tension.
|
 |